Description
The M9N GPS uses multi-constellation GNSS powered by u-blox M9N, a concurrent GNSS receiver that can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture, all four major GNSS constellations, GPS, Galileo, GLONASS, and BeiDou, can be received concurrently.
It also comes with the IST8310 or IST8308 compass, tricolored LED indicator, buzzer, and a safety switch. There are 3 different connector options for different purposes. This module ships with a baud rate of 115200 (38400 previously).
The high-gain 25 x 25 mm2 patch antenna provides excellent performance, and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna and a rechargeable backup battery for warm starts.
Feature
- Ublox M9N GNSS Receiver
- Accurate Positioning
- Fast Navigation Update Rate
- IST8310 or IST8308 Compass
-
High-gain 25*25*4mm antenna
- Internal Buzzer, Safety switch
- Ultra Bright UI RGB LED
Note
- IST8308 is supported by PX4 V1.16.0+ on Pixhawk 6C and 1.14.3+ on Pixhawk 6X
- The Status LED driver has changed. This LED is supported in PX4 1.14, ArduPilot 4.4.0 & later. (More info)
Specifications
| |
Holybro M10 GPS |
Holybro M9N GPS |
| GNSS Receiver |
Ublox M10 |
Ublox M9N |
| Number of Concurrent GNSS |
Up to 4 GNSS |
Up to 4 GNSS |
| BeiDou |
BeiDou |
| Galileo |
Galileo |
| GLONASS |
GLONASS |
| GPS |
GPS |
| QZSS |
QZSS |
| Frequency Band |
GPS L1 |
GPS L1 |
| Galileo E1 |
Galileo E1 |
| GLONASS L1 |
GLONASS L1 |
| BeiDou B1 |
BeiDou B1 |
| SBAS L1 |
SBAS L1 |
| QZSS L1 |
QZSS L1 |
| Compass |
IST8310 or IST8308 |
IST8310 or IST8308 |
| Output Protocol |
UBX (U-blox) |
UBX (U-blox) |
| NMEA |
NMEA |
| Accuracy |
2.0m CEP |
1.5m CEP |
| Nav. Update Rate |
Up to 25 Hz (single GNSS), |
Up to 25 Hz (4 concurrent GNSS) |
| Up to 10 Hz (4 concurrent GNSS) |
| GNSS Augmentation System |
EGNOS, GAGAN, MSAS, and WAAS |
EGNOS, GAGAN, MSAS, and WAAS |
| QZSS: L1S |
QZSS: L1S |
| Default Baud Rate |
115200 |
115200 |
| Input Voltage |
4.7-5.2V |
4.7-5.2V |
| Connector Type |
| JST-GH-10pin |
| JST-GH-6pin |
| Molex 1.25mm 6pin & 4pin & 3pin (not available for V2) |
|
| Antenna |
25 x 25 x 4 mm ceramic patch antenna |
| Antenna Gain |
1.5dbi |
| Antenna LNA Gain |
22dB |
| Power consumption |
Less than 200mA @ 5V |
Less than 200mA @ 5V |
| Operating Temperature |
-40~80°C |
-40~80°C |
| Version |
|
|
| Dimension |
| φ50 x14.4 mm |
φ51 x18.5 mm |
|
| φ50 x14.4 mm |
φ51 x18.5 mm |
|
| Weight |
|
|
| IP Rating |
|
|
| Cable Length |
27cm (42cm cable purchase separately) |
27cm (42cm cable purchase separately) |
| Other (V1) |
Tri-color LED |
Tri-color LED |
| Onboard Buzzer |
Onboard Buzzer |
| Safety Switch |
Safety Switch |
| LNA MAX2659ELT+ RF Amplifier |
LNA MAX2659ELT+ RF Amplifier |
| Rechargeable Farah capacitance |
Rechargeable Farah capacitance |
| Low-noise 3.3V regulator |
Low-noise 3.3V regulator |
Note
- The Status LED driver has changed. This LED is supported in PX4 1.14, ArduPilot 4.4.0 & later. (More info)
- Ardupilot User: If unable to perform normal compass calibration "compass dance" for any reason, set parameter COMPASS_ORIENT=6 (Yaw270) for proper compass orientation.
PIN MAP
Reference Link:
Package Includes:
- 1x M9N GPS Module
- 1x Fixed Carbon Fiber GPS mount
